Brother Printers are one of the most common brands of printers that you can get. With new features and functions that they update in their models, getting your Brother printer not connected to the WiFi can sometimes get confusing. If you are facing issues with getting your Brother Printer connected to WiFi, follow us to get all the solutions you need.
Best Tricks to Make Brother Printer Connect to WiFi
- First of all, make sure that you have noted down the name of your network and security key correctly. These details are provided on the backside of the router.
- Then, use the Control Panel on your Brother Printer to set it up.
- Connect the AC power cord to the printer and switch it on.
- Then press on Menu and choose network settings or wireless setup using the up and down arrow keys.
- Choose the WLAN by pressing the arrow keys and then press on “OK”.
- Again, with the help of arrow keys, choose the setup wizard and press OK.
- Enable the wireless network, as this will start the wireless setup wizard.
- Your Brother Printer will now start searching for your network. Select your SSID and enter the security key that you had noted down earlier.
Still Not Connected to WiFi?
If your printer is still not connected to the WiFi, then try out the following steps:
Step 1: Reboot
- Switch off both your printer and router.
- Then switch in both one by one.
- Once the home screen comes on the printer, try connecting it to your router.
Step 2: Range
- Try to keep your Brother Printer within 8 metres of the router. If the distance between the printer and router is too large, then the signal might be weak.
- You may receive a Brother Printer error message on your mobile. Try to keep the router within the range of the printer to get a better connection.
Step 3: Reset Network Settings
Sometimes, the printer may fail to connect to your router if you have changed the password recently. In that case,
- Switch on your printer first and go to the “Menu” or “Home” screen.
- Then go to the Network option and click on the Network Reset option.
- Then select Yes or 1 to reset your new network password.
Step 4. WPS Feature
Under this method, you have to use the WPS key to connect your printer to WiFi. That:
Part A: Push Button Method
- First, select the menu option on your printer and select network and press OK.
- Then, using arrow keys, reach the WLAN option, select your WPS network and press OK.
- Then press the push button on your printer.
- Go to your router and press the WPS button there.
- Finally, leave the devices for 12o seconds or more and wait for them to get synced.
Part B: Pin Method
- Return to the WPS option on your printer.
- Then press on the PIN button and enter the WPS pin as given on your router.
- Press the OK button and wait for some time for the devices to sync.
Step 5: Firmware Update
If you are using an old or outdated printer version, get a new firmware upgrade to connect your device to WiFi using the steps mentioned above.
We are certain that the above tips and tricks will solve the issues of your Brother Printer not getting connected to WiFi. At SolveYourIssue, we always try to offer the best suggestions to make your technological life easier.